BuzziTab Acoustic Wall Panel

Dimensions

• Item
  Width 23.43", Height 23.43", Depth 3.15", Weight 7.28Lbs

Details

• Material
  Foam, Wood, Fabric
• Assembly Required
  No
• Warranty
  5 Year Limited
• Made In
  Netherlands
•  
  Commercial/Residential use
•  
  Upholstered in recycled fabric
•  
  Vertical/Horizontal installation
•  
  Playful graphical wall feature
•  
  Absorbs low tones, mid tones and high tones

More Information

• FABRICS - UPHOLSTERY: Regular cleaning is important in order to keep the upholstery textile looking its best and to prolong its life. Dust and dirt wear down the textile and also reduce its fire-retardant properties. Do: Vacuum-clean regularly, at half power where appropriate. Remove dust using a soft brush, if needed. Treat spillages immediately. Don’t: Don’t wash. Don’t use abrasive sponges or cloths. Don’t steam products with a 3D pattern. Stain removal: First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Light stains: carefully dab with a pH neutral soap and a clean damp cloth or sponge. Edge marks can be avoided by dabbing gently in circular motions towards the center of the stain with a clean lint-free cloth. Greasy stains: use appropriate detergents or solvents. In all cases, we recommend testing stain removal agents on an inconspicuous area first, to see if there are any effects. Large, heavy stains: professional dry clean is recommended. Make sure to dry the fabric fully before use. It may also be necessary to use a hairdryer to avoid leaving edge marks. This applies especially to microfiber textiles. SOLID WOOD: Do: Clean all surfaces frequently with a soft, water-dampened cloth, wiping in the direction of the grain. Use coasters under hot objects such as coffeepots and cups (avoid temperature extremes). Lift objects to move them. Immediately remove all liquids on wood surfaces by blotting them dry. Use a protective desk pad under all writing areas and business machines. Level the product to prevent items from sliding across the surface (and allow better movement of drawer slides). Try to expose the wood to constant level of humidity through the use of humidifiers or water evaporators. Ideally, the indoor humidity levels must be between 50% and 60% to avoid wood shrinks and small cracks and splits to occur. Don’t: Don’t use abrasive sponges or cloths. Don’t clean or wipe against the grain. Don’t expose the furniture to extreme heat, cold or humidity variations (keep away from radiators, air conditioning vents, humidifiers, fireplaces, etc.). Don’t place hot object directly on the wood as this may cause rings to form. Don’t pull items across the wood as this will scratch the surface. Don’t expose the furniture to strong sunlight (this will accelerate changes in the color of the wood). Don’t use harsh solvents - they might cause the finish to deteriorate. Don’t use glass cleaners or waxes. Don’t use furniture polishes as they build up layers which trap dirt and particles which can scratch surfaces and leave a smeared appearance. Don’t allow water to stand on the wood surface. Stain removal Surface water - dried droplets: Rub a damp sponge over the surface and wipe dry. Drinks: Soak up and rub with a damp cloth and wipe dry. Grease: Wipe with a wet sponge and washing-up liquid, rinse and dry. Glue, nail varnish: Call a professional cleaner, if possible. Most varnishes/lacquers are attacked by acetone. Ink, permanent marker: Clean immediately with methylated spirits or lemon juice. Some indelible pens can leave a mark on the varnish, if cleaning is not done straight away. Refinishing: In the event that scratching or marring has occurred, we recommend that refinishing be carried out by a professional furniture refinishing company.