Alize Stereo Fabric OTF XS Sunlounger

Designed by Pascal Mourgue
Commercial/Residential use
3 position adjustable backrest (13.5-27-32.5 in.)
Weight capacity: 400 pounds
Fixed footrest
Stain-Resistant, Mold-Resistant
Material: Aluminum, Batyline OTF Mesh
Frame Material: Aluminum
Stackable: Yes
Adjustable: Back
Eco-Friendly Packaging: This design is shipped using recycled, recyclable or limited packaging materials to reduce waste and carbon footprint.
OK for Outdoor Use
Assembly Required: No
Warranty: 1-3 Years
Made In China

• Finish: Clay Grey, Storm Grey, Acapulco Blue

Item: Width 28.5", Height Adjustable From 14", Adjustable To 33", Depth 75", Weight 26Lbs
Seat: Height 13"

• Please take the greatest of care when unwrapping your furniture so as not to damage it in any way. Marks from knives and scissors, scratches from staples or from placing tabletops on the ground, etc., are not covered under the Fermob guarantee. Maintenance is key to the longevity of your furniture. Clean metal surfaces, particularly tables, when debris builds on surfaces or just when you want to admire its beautiful color. Bird droppings, sap, leaves (organic substances) and other potentially corrosive substances should be cleaned as soon as noticed. To prevent scratches and water retention, we recommend that you do not place decorative objects or flowerpots on tables. Many Fermob designs are constructed of steel. Treat these pieces like you would a car. Steel will rust once the outer paint layers are compromised or scratched through. If this occurs, please use Touch-Up Spray (to cover larger areas) or a Paint Pen (for nicks and thin scratches) to touch up these areas. Paint can be purchased through your local dealer or through our website. Keep in mind that by the nature of the material, steel rusts. For humid or saline environments aluminum products should be chosen rather than steel. The timing of rust development will depend on the care and environment (humid or salty air speeds up this process). Never leave your Fermob under a cover or non-breathing material such as a tarp. This will promote the deterioration of the finish. Fermob is happiest out in the open or stored away in a dry location with good air circulation. The best method to clean Fermob furniture is washing with soap and water. Gently dust beforehand to avoid scratches due to existing rough particles. Use a soft sponge or other nonabrasive cloth along with a mild detergent such as DAWN. If using other cleaners, systematically test the cleaner on an inconspicuous place such as under the table top. The CDC (Centers for Disease Control) does not recommend the use of disinfectants for outdoor furniture. If you feel disinfection is necessary, even though not advised, you may use unexpired bleach not to exceed 4 teaspoons of liquid household bleach to 1 quart of room temperature water. Let sit for 1-2 minutes then rinse thoroughly. AVOID use of ethanol, alcohol, petrol, isopropanol, ammonia, alkaline detergents with (pH>9), products to remove graffiti, and other caustic or acidic products. Occasional use of a bit of pure mineral oil will give your Fermob a clear coat that will both brighten and provide a gentle seal of protection. OTF (Outdoor Technical Fabric) should be protected from potential damage from contact with sharp objects or sources of heat such as cigarettes.

Manufacturer IDs: view

8911A5ST 891126ST 891121ST

California Residents: Prop 65 regulations