Passage 5-Light Circular Pendant

Dimensions

• Canopy
  Height 0.8", Diameter 5.5"
• Fixture
  Height 18.1", Diameter 30.3", Weight 17.6Lbs
• Maximum Hanging
  Length Adjustable From 23.1", Adjustable To 52.2"

Details

• Material
  Steel
• Shade Material
  Glass
• Dimmable
  No
• Dimmer
  Not Included
• Dimmer Type
  Glass
• Sloped Ceiling Adaptable
  Yes
• Installation Type
  Hardwired
• Finish
  Black
• Location Rating
  UL Listed Damp
• Title 20
  This design is compliant with California's rigorous Title 20 energy efficiency mandate.
• Assembly Required
  Yes
• Warranty
  Lifetime Limited
• Made In
  USA
• Lighting Style
  Soft/Diffused/Ambient
•  
  Commercial/Residential use
•  
  Stylish yet practical design that fits into any decor style
•  
  Handcrafted in Vermont, USA, ensuring top-notch quality

Lighting

• Total Lumens
  2500.0
• Volts
  120
• Color Temp
  2700 (Warm)
• Light Source
  Light Bulb (Not Included)
• CRI
  80
• Total Wattage
  5W
• Average Lifespan (Hours)
  15,000
• Bulb Type
  5W B11 E12
• # of Bulbs
  5 (Not Included)

More Information

• Product Care, Maintenance and Cleaning Instructions All fixtures must be turned off when cleaning or polishing Painted or Slumped Glass: Gently wipe the surface of the glass with a soft damp cloth. Never scrub, use an abrasive, or any solvent-based cleaning products. You may use warm water to clean the glass. Air dry. Art or Blown Glass: Gently wipe the surface of the glass with a soft damp cloth. Never scrub or use an abrasive. You may also use warm water or glass cleaner. Air dry. Indoor Finishes: Use a dry soft cloth for dusting purposes. Do not use any heavy cleaners. This could damage the powder coating on your finish. Outdoor Finishes: Methods for cleaning the powder coat finish depend on the characteristics of the surface soil. Use water and mild soap or detergent with a sponge or soft cloth for light surface soils. For medium to heavy soils a mild solvent, such as mineral spirits, can be used for removal of grease, sealants or caulking compounds. Spot testing should be performed first to ensure there is no coating damage or staining from cleaning materials.