Brass Outdoor Torches & Accessories

Although tiki torches are often marketed as bug repellents due to their citronella oil, studies indicate that citronella is largely ineffective at keeping insects away. For true bug protection, consider supplementing with targeted pest control solutions or lighting designed specifically to repel insects.

Expert Tip: While citronella torches have limited effectiveness, pairing them with oscillating fans (wind speeds over 1 mph disrupt mosquito flight) creates a 70% larger bug-free zone. For serious pest control, combine torches with CO2-emitting mosquito traps placed upwind.

Accessory lighting refers to auxiliary fixtures that serve as complements to your primary outdoor lighting setup. These lights are not intended to be the main source of illumination but rather to enhance mood, improve visibility in smaller zones, or highlight specific features like walkways, planters, or architectural elements.

Expert Tip: Accessory lights with 100-200 lumen output and 25-degree beam spreads prevent "light pollution" that disturbs nocturnal wildlife. For subtle path lighting, space fixtures at 8-10 foot intervals—this creates a "breadcrumb" effect without over-illumination.

The name "tiki torch" comes from their roots in Polynesian culture, where decorative carved wooden figures, or tikis, were traditionally associated with outdoor gatherings and celebrations. Modern tiki torches have adopted this name to evoke tropical or island-themed ambiance.

Expert Tip: Authentic Polynesian torches used kukui nut oil, which burns smokeless at 30% higher temperatures than paraffin. Modern "tiki" torches with fiberglass wicks last 3x longer than cotton wicks but require periodic trimming to prevent sooting.

Professional installation of landscape lighting typically ranges from $300 to $2,000 depending on the complexity of the design, number of fixtures, and layout. Custom installations with extensive wiring and zoning will land on the higher end.

Expert Tip: Pros charge 75 – 125 per fixture for installation, but you can save 40% by pre-digging trenches (6" deep for 12V systems) and installing conduit yourself before their arrival. Always get systems with 50% extra transformer capacity for future expansion.

Warm white (2700K–3000K) is most commonly used for landscape lighting as it creates a cozy, inviting atmosphere. However, cooler temperatures can be used for security or task lighting. Choose a color temperature that matches your outdoor style and function.

Expert Tip: 2700K lights attract 60% fewer insects than 3000K+ options. For security lighting, use 5000K only on motion sensors—the blue-white light triggers faster pupil contraction, improving nighttime visibility during alerts.

Landscape lighting includes spotlights, path lights, flood lights, deck lights, well lights, and accent or accessory lighting like outdoor torches. Each type serves a unique purpose—whether it's safety, ambiance, or highlighting specific elements in your yard.

Expert Tip: "Moonlighting" (downlighting from trees) creates natural shadows when placed at 20-30 foot heights. For water features, submersible LEDs with 80+ CRI render truer colors than standard pool lights.

Most LED landscape lights range from 4 to 15 watts, offering sufficient brightness while staying energy-efficient. The required wattage depends on the area and the intended use—pathways may need lower wattage, while trees or architectural elements may need more.

Expert Tip: LED wattage can mislead—focus on lumens per watt (efficacy). High-quality LEDs produce 100+ lumens/watt; cheap ones may deliver only 60. A 5W premium LED often outperforms a 10W budget bulb.

LED landscape lights can last anywhere from 25,000 to 50,000 hours depending on usage and environmental exposure. Their longevity makes them a smart investment for consistent and low-maintenance outdoor illumination.

Expert Tip: Heat sinks matter more than claimed hours—look for cast aluminum housings that keep junction temps below 185°F. In hot climates, LEDs last 50% longer when installed in shaded areas versus full sun exposure.

On average, expect to spend between $2,500 and $5,000 for a full-service professional landscape lighting installation. Costs vary based on project size, type of fixtures used, and complexity of the design.

Expert Tip: Copper wiring costs 3x more than aluminum but prevents voltage drop over long runs. For properties over 1 acre, copper pays for itself in reduced transformer needs within 5 years.

Low-voltage landscape lighting systems typically operate at 12 volts and are ideal for residential settings due to their safety and energy efficiency. Some systems may run at 24 volts or higher for commercial applications.

Expert Tip: 12V systems lose 1.5 volts per 100 feet—use 10/2 wire for runs over 50 feet. Commercial 24V systems maintain brightness at 200+ feet but require professional transformer tuning to avoid fixture damage.

The right lumen output depends on the purpose:

Path lights: 100–200 lumens
Spotlights: 300–700 lumens
Flood lights: 700–1300 lumens

Consider the size and location of your space when choosing brightness levels.

Expert Tip: For dark-sky compliance, aim lights downward and cap brightness at 300 lumens near property lines. Uplighting trees requires 1 lumen per 10 square inches of trunk—a 24" diameter tree needs ~450 lumens.

Tiki torches can burn for about 4–6 hours on average with a full fuel canister, depending on the size of the reservoir and the wick setting. Always follow manufacturer guidelines to maximize safety and burn time.

Expert Tip: Wick thickness directly affects burn time—1/2" braided wicks last 8+ hours but consume fuel faster. For evening events, pre-soak wicks 30 minutes before lighting to prevent uneven burns.

DIY tiki torches can be crafted from wine bottles, mason jars, or bamboo poles. You'll need a fuel reservoir, citronella or paraffin oil, a wick, and a flame guard. Be sure to use fire-safe materials and secure the torch in a stable holder or planter.

Expert Tip: Repurposed copper pipes make superior DIY torch bodies—their high thermal conductivity prevents overheating. Always use fiberglass wick sleeves (not metal) where the wick meets the fuel reservoir to prevent flare-ups.

Tiki torches are primarily used to add decorative and ambient lighting to outdoor gatherings, patios, and pathways. While often associated with tropical aesthetics, they also provide soft, flickering illumination for nighttime entertaining.

Expert Tip: Strategic torch placement creates "light corridors"—space them 12 feet apart along pathways to guide guests naturally. For wind protection, install torches behind knee-height shrubs rather than in open areas.