Lorette Round Perforated Table

Dimensions

• Item
  Height 29", Diameter 43.5", Weight 49Lbs
• Table
  Thickness 1.1"

Details

• Material
  Steel
• Frame Material
  Steel
•  
  OK for Outdoor Use
• Assembly Required
  Yes
• Warranty
  1-3 Years (Product Dependent)
• Made In
  France
•  
  Perforated, laser-cut electro-galvanized steel table top with steel tube base
•  
  UV-Resistant
•  
  Seats 6 guest
•  
  Floor to Bottom Measurement: 28.5 inch
•  
  Commercial/Residential use
•  
  Stacking capacity : x 4 (Height - stacked : 37 inch)
•  
  Weight Capacity : 275 pounds
•  
  Includes One-piece pads

Lighting

• Lamp Type
  Xenon

More Information

• Please take the greatest of care when unwrapping your furniture so as not to damage it in any way. Marks from knives and scissors, scratches from staples or from placing tabletops on the ground, etc., are not covered under the Fermob guarantee. Maintenance is key to the longevity of your furniture. Clean metal surfaces, particularly tables, when debris builds on surfaces or just when you want to admire its beautiful color. Bird droppings, sap, leaves (organic substances) and other potentially corrosive substances should be cleaned as soon as noticed. To prevent scratches and water retention, we recommend that you do not place decorative objects or flowerpots on tables. Many Fermob designs are constructed of steel. Treat these pieces like you would a car. Steel will rust once the outer paint layers are compromised or scratched through. If this occurs, please use Touch-Up Spray (to cover larger areas) or a Paint Pen (for nicks and thin scratches) to touch up these areas. Paint can be purchased through your local dealer or through our website. Keep in mind that by the nature of the material, steel rusts. For humid or saline environments aluminum products should be chosen rather than steel. The timing of rust development will depend on the care and environment (humid or salty air speeds up this process). Never leave your Fermob under a cover or non-breathing material such as a tarp. This will promote the deterioration of the finish. Fermob is happiest out in the open or stored away in a dry location with good air circulation. The best method to clean Fermob furniture is washing with soap and water. Gently dust beforehand to avoid scratches due to existing rough particles. Use a soft sponge or other nonabrasive cloth along with a mild detergent such as DAWN. If using other cleaners, systematically test the cleaner on an inconspicuous place such as under the table top. The CDC (Centers for Disease Control) does not recommend the use of disinfectants for outdoor furniture. If you feel disinfection is necessary, even though not advised, you may use unexpired bleach not to exceed 4 teaspoons of liquid household bleach to 1 quart of room temperature water. Let sit for 1-2 minutes then rinse thoroughly. AVOID use of ethanol, alcohol, petrol, isopropanol, ammonia, alkaline detergents with (pH>9), products to remove graffiti, and other caustic or acidic products. Occasional use of a bit of pure mineral oil will give your Fermob a clear coat that will both brighten and provide a gentle seal of protection.