Level LED Bath Bar

This light is at least 3500 K as per the specs (note that the description here says 3000K). Very cool and will seriously change the colors of the room. Also it's a doozy to install. The cover plate depth is very shallow and could not be attached using the included wire nuts -- they were too fat.

This light is absolutely beautiful and incredibly modern. One review here says the 3500K is "cool". Not sure what they are talking about, 3500-3700K is almost pure white just like you find at a high end department store. It is the perfect color to work / view local color in as there is almost no color change in surfaces from the light. I would say if you are coming from a 2500-2700K temperature, this will be a big change in your eyes but the light is nothing close to "cool". As for quality, this is my 7th WAC / Modern Forms product and I can say the quality is definitely there. Perhaps not quite as high quality as my Blackjack products, but the price point is much lower and the quality is almost on par. The only issue I have with the quality is this is the first WAC / Modern Forms product I have purchased with a very slight (probably between 250 - 500 MS) delay in light activation. This is most likely due to the fact the transformer requires manual installation instead of coming from the factory soldered. If WAC continues down this path of ultra slim, modern products with manually installed transformers - they need to figure out how to keep the instant activation quality on par with their other products. Finally - there are a few things to know for installation: 1. The transformer requires manual mounting to a junction box or stud. If you have a junction box, I would recommend removing it as most junction boxes are larger than the ultra low profile back plate which requires you to use the conversion plate the light comes with which ruins the slim look this light has. I removed my junction box from the wall and mounted the transformer with electrical tape backing, then screwed it into a stud. 2. If you do not recess your house wires into the wall you will most likely not be able to mount the light due to the ultra thin back plate. One review said the screws are not the right size or something - mine mounted perfectly fine with provided screws but IF I used the large caps you need to tie into new construction house wires and did not recess those wires into the wall (meaning you tried to hide them in the back plate area itself) they will prevent the back plate from going flush with the mounting screw holes and you will need to figure out an alternative method to mount the light. 3. The back plate is most likely not going to align with studs since you really should remove your junction box. I can say the back plate is quite easy to drill or dremel through to make new mounting holes so that should be an easy problem to resolve with basic tools, a stud in the right location and a drywall anchor.

Saw one of these WAC lights while staying in a friends home. We liked hers and we bought 2 for our 2 bathroom remodels. Bright and diffuse and dimable. YLighing was fast to ship. All in all, we are de-lighted!

Love this feature! Good quality and great look! Would recommend for any bathroom!

I just love how this light fit in my powder room. It is very modern but not overly. It gives out plenty of light and bring excitement into the room. Great product ! Great transaction as well! Very perfect.