BuzziProp LED Pendant

Dimensions

• Canopy
  Width 11.02", Height 1.57", Depth 5.51"
• Fixture
  Height 17.72", Diameter 17.72", Weight 14.33Lbs
• Maximum Hanging
  Length Adjustable From 22.52", Adjustable To 96.46"

Details

• Material
  Metal, glass
• Shade Material
  Foam, Fabric
• Dimmable
  No
• Dimmer
  Not Included
• Dimmer Type
  Fabrics
• Sloped Ceiling Adaptable
  No
• Installation Type
  Hardwired
• Finish
  BuzziFabric Autumn
• Location Rating
  UL Listed
• Assembly Required
  No
• Warranty
  2 Years
• Made In
  Netherlands
• Lighting Style
  Soft/Diffused/Ambient
•  
  Commercial/Residential use
•  
  Absorbs low tones, mid tones and high tones
•  
  Black powder coated metal canopy
•  
  PEFC/07-32-385 Certified
•  
  Features a frosted glass globe
•  
  Globe dimensions - 5.91" Dia. x 7.87" H

• Total Lumens
  1500.0
• Volts
  120
• Color Temp
  3000 (Soft White)
• Lamp Type
  LED Built-in
• CRI
  90
• Equivalent Halogen, CFL or LED Bulb Can Be Used
  No
• Total Wattage
  19.00
• Average Lifespan (Hours)
  50,000

More Information

• FABRICS - UPHOLSTERY: Regular cleaning is important in order to keep the upholstery textile looking its best and to prolong its life. Dust and dirt wear down the textile and also reduce its fire-retardant properties. Do: Vacuum-clean regularly, at half power where appropriate. Remove dust using a soft brush, if needed. Treat spillages immediately. Don’t: Don’t wash. Don’t use abrasive sponges or cloths. Don’t steam products with a 3D pattern. Stain removal: First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Light stains: carefully dab with a pH neutral soap and a clean damp cloth or sponge. Edge marks can be avoided by dabbing gently in circular motions towards the center of the stain with a clean lint-free cloth. Greasy stains: use appropriate detergents or solvents. In all cases, we recommend testing stain removal agents on an inconspicuous area first, to see if there are any effects. Large, heavy stains: professional dry clean is recommended. Make sure to dry the fabric fully before use. It may also be necessary to use a hairdryer to avoid leaving edge marks. This applies especially to microfiber textiles. METALS: Do: Clean as needed using a soft cloth or brush with amild detergent. Use coasters under hot objects such as coffeepots and cups (avoid temperature extremes). Lift objects to move them. Use a protective desk pad under all writing areas and business machines. Don’t: Don’t use abrasive cleansers abrasive cloths or sponges as this will scratch the surface. Don’t use cleaners containing chlorine. Don’t expose the furniture to extreme heat, cold or humidity variations (keep away from radiators, air conditioning vents, humidifiers, fireplaces, etc.). Don’t pull items across the metal as this may scratch the surface. Stain removal: Use warm water and a non-abrasive cloth and pH neutral solution. Dry the metal after cleaning. Refinishing: In the event that scratching or marring has occurred, we recommend that refinishing be carried out by a professional furniture refinishing company.