WAC Lighting, founded in 1984, has developed a strong reputation for high quality decorative and task lighting. Based in Garden City, New York, WAC Lighting is a leading manufacturer of low voltage, line voltage and LED lighting, including track systems, transformers, lamps, cabinet lighting and recessed downlights.
The LEDme 3" Shower Trim is available with the following:
- Tempered borosilicate glass lens
- Die-cast aluminum construction
- Less than 1/8" thick trim profile
- UL Listed for wet locations
- Use with the WAC LEDme 3" Housing
Finish: Chrome, White
Pattern / Design: Round, Square
LumensThe amount of light that comes from a bulb, which has commonly been measured in watts. The more lumens, the brighter the bulb.
WattageA measurement of the power delivered to a component of an electric circuit (allowing a one-ampere current to flow through the component under the pressure of 1 volt.)
Bulb ShapeBulb shapes are denoted with a letter, which describes the shape, and a number, which indicates the size. The number indicates the diameter of the light bulb at its widest part in eighths of an inch.
BaseThe part of the bulb that connects to the fixture and its power supply. Bulb bases are denoted with the letter E, and a number which indicates the diameter of the bulb base at its widest part in millimeters.
VoltageIndicates how much voltage a bulb can accept via the fixture it's installed in.
Light Color TemperatureThe relative color from a light source, measured on the Kelvin temperature scale. Warm light is lower in color temperature (2700-3000 K) and cool, blue light is higher (5000 K).
Average Rated LifeThe average amount time that a bulb is expected to last.
CRICRI = color rendering index. This number, which can go from 0 to 100, measures the ability of a light or bulb accurately renders colors. The higher the number, the better, with most quality bulbs these days measuring at least in the 80s.
- Round Option Item: Height 2.38", Diameter 4.5", Opening 2.88"
- Square Option Item: Height 2.38", Width 4.5", Opening 2.5"
Manufacturer IDs: view
HR-LED331-CH, HR-LED331-WT, HR-LED371-CH, HR-LED371-WT
Need help with some of our terminology? Check out Lumens' Lighting & Design Glossary.
Related Searches and Products
The Element 3 Inch LED Trim frames small aperture downlights suitable for lighting commercial and residential environments. It is made of thin die cast aluminum for a sleek, out-of-the-way appearance that allows for sufficient illumination without drawing attention to itself. ...
The WAC Lighting 3" Tesla LED Open Square Trim is a minimum profile, square downlight with an interior open reflector. This dimmable, energy efficient trim is available in multiple finishes, optics and color temperatures. Compatible with WAC HR-3LED series housings. ...
The dimmable, energy efficient WAC Lighting 3 Inch Tesla LED Round Open Reflector is a minimum profile, round downlight trim. Available in Flood, Narrow Flood and Spot beam spreads as well as multiple finishes and color temperatures. For use with ...